White Aluminium Hinged Height Kit

Related Products

• 

  White Aluminium Accessory Pack – # Required in addition to width and height pieces

  £16.00

  Add to cart

  White Aluminium Accessory Pack – # Required in addition to width and height pieces

  Add to cart

  /

  Share it

  Share on:
• 

  UPVC Vertical Sliding (Sash) Height Kit

  £90.00 – £142.00

  Select options

  UPVC Vertical Sliding (Sash) Height Kit is Available in UPVC – Height 1220mm or (4ft) to 2438mm or (8ft)

  This UPVC Vertical Sliding (Sash) Height Kit is specially designed for traditional sash windows, but is ideal for any window where top or bottom access is required.

  As with the vertical Sliding System the panes may be of equal or unequal size to match your window layout.

  The panes are held open when required by an ingenious system of ratchets which support the pane in any position.

  The Vertical Sliding System is suitable for windows up to 8 feet high or 4 feet wide but no single pane should exceed 12sq.ft in area.

  It is normally fitted to the inside of the window recess. If, however , you have no suitable recess, the system may also be fitted directly to the flat wooden surface of the window surround. In either case there should be a minimum flat area of at least 42mm (1 11/16″ ) to accept the tracks.

  SELECTING YOUR KITS

  1.Measure the height and width of your window recess.

  2.Choose 1 x Height Kit and 1 x Width Kit to the nearest longer size.

  3.The kit contains accessories and step-by-step instructions.

  4.Select your glazing material after you have installed the outer tracks and taken precise measurements from them. Each single frame should not exceed 20sq. ft.

  Select options

  /

  Share it

  Share on:
• 

  White Aluminium Horizontal Sliding DIY secondary glazing Width Kit

  £96.00 – £164.00

  Select options

  Available in white aluminium – Width 1220mm (4ft) to 2428mm (8ft)

  The system makes up to give two panes which may be of equal or unequal size to match your existing window layout. The basic two-pane system may be extended to three or more panes by using one multi-pane kit for each additional pane.

  The panes slide smoothly in tracks which are fitted to the window recess. There should be a flat area of at least 42mm ( 1 11/16″ ) all round to accept the tracks. The system is suitable for windows up to 8 feet wide by 6 feet high, but no single pane should exceed the following sizes for 4mm glass or acrylic and 2mm acrylic.

  SELECTING YOUR KITS

  1.Measure the height and width of your window recess.

  2.For 2 Sliding panes choose 1 x Height Kit and 1 x Width Kit to the nearest longer size.

  3.For 3 or more sliding panes select 1 x Multi-Pane Kit  for each additional pane.

  4.The kit contains accessories and step-by-step instructions.

  5.Select your glazing material after you have installed the outer tracks and taken precise measurements from them. Each single frame should not exceed 20sq. ft.

  Select options

  /

  Share it

  Share on: