White Aluminium Horizontal Sliding DIY secondary glazing Width Kit

Related Products

• 

  UPVC Vertical Sliding (Sash) Width Kit

  £60.00 – £90.00

  Select options

  UPVC Vertical Sliding (Sash) Width Kit Available in UPVC – Width 610mm or 2(ft) to 1220mm or (4ft)

  This UPVC Vertical Sliding (Sash) Width Kit is specially designed for traditional sash windows, but is ideal for any window where top or bottom access is required.

  As with the verticalSliding System the panes may be of equal or unequal size to match your window layout.

  The panes are held open when required by an ingenious system of ratchets which support the pane in any position.

  The Vertical Sliding System is suitable for windows up to 8 feet high or 4 feet wide but no single pane should exceed 12sq.ft in area.

  It is normally fitted to the inside of the window recess. If, however , you have no suitable recess, the system may also be fitted directly to the flat wooden surface of the window surround. In either case there should be a minimum flat area of at least 42mm (1 11/16″ ) to accept the tracks.

  SELECTING YOUR KITS

  1.Measure the height and width of your window recess.

  2.Choose 1 x Height Kit and 1 x Width Kit to the nearest longer size.

  3.The kit contains accessories and step-by-step instructions.

  4.Select your glazing material after you have installed the outer tracks and taken precise measurements from them. Each single frame should not exceed 20sq. ft.

  Select options

  /

  Share it

  Share on:
• 

  White Aluminium Hinged Height Kit

  £35.00 – £70.00

  Select options

  White Aluminium Hinged Height Kit is Available in white aluminium – Height 915mm (3ft) to height 1524mm (5t)
  The White Aluminium Hinged Pane System makes up to give one hinged pane. It may be hinged from the side or from the top to match your window. The system fits directly to the flat wooden face of the window surround provided it is at least 32mm (1 1/4″) wide to accept the fittings.

  Where two hinged panes are used on the same window , allow at least 50 mm ( 2″ ) where the panes meet.

  SELECTING YOUR KITS

  1.Measure the height and width of your window opening

  2.Select a Width Kit not shorter than the width of your window opening.

  3.Select a Height Kit which exceeds the height of your window opening by at least 32mm (1 1/4″ ).

  4.You will also need an Accessory Kit for each pane

  5.The maximum pane size is 12sq.ft (1.11 sq m)when side hinged, 18sq.ft. (1.67 sq m( when top hinged.

  Select options

  /

  Share it

  Share on:
• 

  White Aluminium Hinged Width Kit

  £25.00 – £55.00

  Select options

  Available white aluminium – Width 610mm (2ft) to width 1524mm (5ft)

  The Hinged Pane System makes up to give one hinged pane. It may be hinged from the side or from the top to match your window. The system fits directly to the flat wooden face of the window surround provided it is at least 32mm (1 1/4″) wide to accept the fittings.

  Where two hinged panes are used on the same window , allow at least 50 mm ( 2″ ) where the panes meet.

  SELECTING YOUR KITS

  1.Measure the height and width of your window opening

  2.Select a Width Kit not shorter than the width of your window opening.

  3.Select a Height Kit which exceeds the height of your window opening by at least 32mm (1 1/4″ ).

  4.You will also need an Accessory Kit for each pane.

  5.The maximum pane size is 12sq.ft when side hinged, 18sq.ft. when top hinged.

  Select options

  /

  Share it

  Share on: