White Aluminium Horizontal Multipane – * Optional Parts

Related Products

• 

  White Aluminium Accessory Pack – # Required in addition to width and height pieces

  £16.00

  Add to cart

  White Aluminium Accessory Pack – # Required in addition to width and height pieces

  Add to cart

  /

  Share it

  Share on:
• 

  White Aluminium Hinged Width Kit

  £25.00 – £55.00

  Select options

  Available white aluminium – Width 610mm (2ft) to width 1524mm (5ft)

  The Hinged Pane System makes up to give one hinged pane. It may be hinged from the side or from the top to match your window. The system fits directly to the flat wooden face of the window surround provided it is at least 32mm (1 1/4″) wide to accept the fittings.

  Where two hinged panes are used on the same window , allow at least 50 mm ( 2″ ) where the panes meet.

  SELECTING YOUR KITS

  1.Measure the height and width of your window opening

  2.Select a Width Kit not shorter than the width of your window opening.

  3.Select a Height Kit which exceeds the height of your window opening by at least 32mm (1 1/4″ ).

  4.You will also need an Accessory Kit for each pane.

  5.The maximum pane size is 12sq.ft when side hinged, 18sq.ft. when top hinged.

  Select options

  /

  Share it

  Share on:
• 

  White Aluminium Horizontal Sliding DIY secondary glazing Width Kit

  £96.00 – £164.00

  Select options

  Available in white aluminium – Width 1220mm (4ft) to 2428mm (8ft)

  The system makes up to give two panes which may be of equal or unequal size to match your existing window layout. The basic two-pane system may be extended to three or more panes by using one multi-pane kit for each additional pane.

  The panes slide smoothly in tracks which are fitted to the window recess. There should be a flat area of at least 42mm ( 1 11/16″ ) all round to accept the tracks. The system is suitable for windows up to 8 feet wide by 6 feet high, but no single pane should exceed the following sizes for 4mm glass or acrylic and 2mm acrylic.

  SELECTING YOUR KITS

  1.Measure the height and width of your window recess.

  2.For 2 Sliding panes choose 1 x Height Kit and 1 x Width Kit to the nearest longer size.

  3.For 3 or more sliding panes select 1 x Multi-Pane Kit  for each additional pane.

  4.The kit contains accessories and step-by-step instructions.

  5.Select your glazing material after you have installed the outer tracks and taken precise measurements from them. Each single frame should not exceed 20sq. ft.

  Select options

  /

  Share it

  Share on: