Secondary DIY Glazing uPVC and aluminium systems

DIY Secondary Glazing Kits

Our DIY secondary glazing kits were designed and developed by Polycell Products ® and became the acknowledged market leader in the 1990´s. The kits are designed to be fitted by an average DIY enthusiast, supplied with detailed fitting instructions.

DIY Secondary Glazing Kits By LinkLine.

LinkLine produces three systems of DIY secondary glazing. These systems were designed and developed by Polycell Products ® and became the acknowledged market leader in the 1990´s. The kits are designed to be fitted by an average DIY enthusiast, giving a large saving against professional installation. All kits are supplied with detailed fitting instructions.

Why LinkLine?

existing character windows

Our products offer an alternative to householders who do not wish to replace their existing character windows, and many cannot due to listed building regulations. LinkLine secondary glazing gives the benefits of double glazing while allowing the retention of the original windows

Flexibility

These secondary glazing systems can easily be removed, so if you move home they can be taken out, to give the same benefits to your next property.

reducing external noise

Our products are one of the best methods of reducing external noise whether from roads, aircraft or other activities near your home. •Secondary glazing can in many circumstances greatly reduce internal condensation.

Proven Market leaders

Our DIY secondary glazing kits were designed and developed by Polycell Products ® and became the acknowledged market leader in the 1990´s.

Our DIY Secondary Glazing Kits

All products

White Aluminium Horizontal Sliding DIY secondary glazing Width Kit
£96.00 – £164.00
Select options

Available in white aluminium – Width 1220mm (4ft) to 2428mm (8ft)

The system makes up to give two panes which may be of equal or unequal size to match your existing window layout. The basic two-pane system may be extended to three or more panes by using one multi-pane kit for each additional pane.

The panes slide smoothly in tracks which are fitted to the window recess. There should be a flat area of at least 42mm ( 1 11/16″ ) all round to accept the tracks. The system is suitable for windows up to 8 feet wide by 6 feet high, but no single pane should exceed the following sizes for 4mm glass or acrylic and 2mm acrylic.

SELECTING YOUR KITS

1.Measure the height and width of your window recess.

2.For 2 Sliding panes choose 1 x Height Kit and 1 x Width Kit to the nearest longer size.

3.For 3 or more sliding panes select 1 x Multi-Pane Kit for each additional pane.

4.The kit contains accessories and step-by-step instructions.

5.Select your glazing material after you have installed the outer tracks and taken precise measurements from them. Each single frame should not exceed 20sq. ft.

Select options
/
Share it
Share on:
UPVC Horizontal Sliding Width Kit
£56.00 – £126.00
Select options

UPVC Horizontal Sliding Width Kit is Available in UPVC – Width 915mm (3ft) to 2438mm (8ft)

The UPVC Horizontal Sliding DIY secondary glazing kits Width Kit makes up to give two panes which may be of equal or unequal size to match your existing window layout. The basic two-pane system may be extended to three or more panes by using one multi-pane kit for each additional pane.

The panes slide smoothly in tracks which are fitted to the window recess. There should be a flat area of at least 42mm ( 1 11/16″ ) all round to accept the tracks. The system is sutable for windows up to 8 feet wide by 6 feet high, but no single pane should exceed the following sizes for 4mm glass or acrylic and 2mm acrylic.

SELECTING YOUR KITS

1.Measure the height and width of your window recess.

2.For 2 Sliding panes choose 1 x Height Kit and 1 x Width Kit to the nearest longer size.

3.For 3 or more sliding panes select 1 x Multi-Pane Kit for each additional pane.

4.The kit contains accessories and step-by-step instructions.

5.Select your glazing material after you have installed the outer tracks and taken precise measurements from them. Each single frame should not exceed 20sq. ft.

Select options
/
Share it
Share on:
UPVC Horizontal Sliding Height Kit
£42.00 – £98.00
Select options

UPVC Horizontal Sliding Height Kit is Available in UPVC – Height 610mm (2ft) to 1829mm (6ft)

The UPVC Horizontal Sliding DIY Secondary Glazing Kits Height Kit system makes up to give two panes which may be of equal or unequal size to match your existing window layout. The basic two-pane system may be extended to three or more panes by using one multi-pane kit for each additional pane.

The panes slide smoothly in tracks which are fitted to the window recess. There should be a flat area of at least 42mm ( 1 11/16″ ) all round to accept the tracks. The system is sutable for windows up to 8 feet wide by 6 feet high, but no single pane should exceed the following sizes for 4mm glass or acrylic and 2mm acrylic.

SELECTING YOUR KITS

1.Measure the height and width of your window recess.

2.For 2 Sliding panes choose 1 x Height Kit and 1 x Width Kit to the nearest longer size.

3.For 3 or more sliding panes select 1 x Multi-Pane Kit for each additional pane.

4.The kit contains accessories and step-by-step instructions.

5.Select your glazing material after you have installed the outer tracks and taken precise measurements from them. Each single frame should not exceed 20sq. ft.

Select options
/
Share it
Share on:
UPVC Vertical Sliding (Sash) Width Kit
£60.00 – £90.00
Select options

UPVC Vertical Sliding (Sash) Width Kit Available in UPVC – Width 610mm or 2(ft) to 1220mm or (4ft)

This UPVC Vertical Sliding (Sash) Width Kit is specially designed for traditional sash windows, but is ideal for any window where top or bottom access is required.

As with the verticalSliding System the panes may be of equal or unequal size to match your window layout.

The panes are held open when required by an ingenious system of ratchets which support the pane in any position.

The Vertical Sliding System is suitable for windows up to 8 feet high or 4 feet wide but no single pane should exceed 12sq.ft in area.

It is normally fitted to the inside of the window recess. If, however , you have no suitable recess, the system may also be fitted directly to the flat wooden surface of the window surround. In either case there should be a minimum flat area of at least 42mm (1 11/16″ ) to accept the tracks.

SELECTING YOUR KITS

1.Measure the height and width of your window recess.

2.Choose 1 x Height Kit and 1 x Width Kit to the nearest longer size.

3.The kit contains accessories and step-by-step instructions.

4.Select your glazing material after you have installed the outer tracks and taken precise measurements from them. Each single frame should not exceed 20sq. ft.

Select options
/
Share it
Share on:
UPVC Vertical Sliding (Sash) Height Kit
£90.00 – £142.00
Select options

UPVC Vertical Sliding (Sash) Height Kit is Available in UPVC – Height 1220mm or (4ft) to 2438mm or (8ft)

This UPVC Vertical Sliding (Sash) Height Kit is specially designed for traditional sash windows, but is ideal for any window where top or bottom access is required.

As with the vertical Sliding System the panes may be of equal or unequal size to match your window layout.

The panes are held open when required by an ingenious system of ratchets which support the pane in any position.

The Vertical Sliding System is suitable for windows up to 8 feet high or 4 feet wide but no single pane should exceed 12sq.ft in area.

It is normally fitted to the inside of the window recess. If, however , you have no suitable recess, the system may also be fitted directly to the flat wooden surface of the window surround. In either case there should be a minimum flat area of at least 42mm (1 11/16″ ) to accept the tracks.

SELECTING YOUR KITS

1.Measure the height and width of your window recess.

2.Choose 1 x Height Kit and 1 x Width Kit to the nearest longer size.

3.The kit contains accessories and step-by-step instructions.

4.Select your glazing material after you have installed the outer tracks and taken precise measurements from them. Each single frame should not exceed 20sq. ft.

Select options
/
Share it
Share on:
White Aluminium Hinged Width Kit
£25.00 – £55.00
Select options

Available white aluminium – Width 610mm (2ft) to width 1524mm (5ft)

The Hinged Pane System makes up to give one hinged pane. It may be hinged from the side or from the top to match your window. The system fits directly to the flat wooden face of the window surround provided it is at least 32mm (1 1/4″) wide to accept the fittings.

Where two hinged panes are used on the same window , allow at least 50 mm ( 2″ ) where the panes meet.

SELECTING YOUR KITS

1.Measure the height and width of your window opening

2.Select a Width Kit not shorter than the width of your window opening.

3.Select a Height Kit which exceeds the height of your window opening by at least 32mm (1 1/4″ ).

4.You will also need an Accessory Kit for each pane.

5.The maximum pane size is 12sq.ft when side hinged, 18sq.ft. when top hinged.

Select options
/
Share it
Share on:
White Aluminium Hinged Height Kit
£35.00 – £70.00
Select options

White Aluminium Hinged Height Kit is Available in white aluminium – Height 915mm (3ft) to height 1524mm (5t)
The White Aluminium Hinged Pane System makes up to give one hinged pane. It may be hinged from the side or from the top to match your window. The system fits directly to the flat wooden face of the window surround provided it is at least 32mm (1 1/4″) wide to accept the fittings.

Where two hinged panes are used on the same window , allow at least 50 mm ( 2″ ) where the panes meet.

SELECTING YOUR KITS

1.Measure the height and width of your window opening

2.Select a Width Kit not shorter than the width of your window opening.

3.Select a Height Kit which exceeds the height of your window opening by at least 32mm (1 1/4″ ).

4.You will also need an Accessory Kit for each pane

5.The maximum pane size is 12sq.ft (1.11 sq m)when side hinged, 18sq.ft. (1.67 sq m( when top hinged.

Select options
/
Share it
Share on:
White Aluminium Accessory Pack – # Required in addition to width and height pieces
£16.00
Add to cart

White Aluminium Accessory Pack – # Required in addition to width and height pieces

Add to cart
/
Share it
Share on:
White Aluminium Horizontal Multipane – * Optional Parts
£60.00
Add to cart

White Aluminium Horizontal Multipane – * Optional Parts

Add to cart
/
Share it
Share on:
UPVC Horizontal Multipane 1829mm or 6‘ – * Optional Parts
£38.00
Add to cart

UPVC Horizontal Multipane 1829mm or 6‘ – * Optional Parts

Add to cart
/
Share it
Share on:

PreviousNext

Best Sellers

UPVC Horizontal Sliding Height Kit
£42.00 – £98.00
Select options

UPVC Horizontal Sliding Height Kit is Available in UPVC – Height 610mm (2ft) to 1829mm (6ft)

The UPVC Horizontal Sliding DIY Secondary Glazing Kits Height Kit system makes up to give two panes which may be of equal or unequal size to match your existing window layout. The basic two-pane system may be extended to three or more panes by using one multi-pane kit for each additional pane.

The panes slide smoothly in tracks which are fitted to the window recess. There should be a flat area of at least 42mm ( 1 11/16″ ) all round to accept the tracks. The system is sutable for windows up to 8 feet wide by 6 feet high, but no single pane should exceed the following sizes for 4mm glass or acrylic and 2mm acrylic.

SELECTING YOUR KITS

1.Measure the height and width of your window recess.

2.For 2 Sliding panes choose 1 x Height Kit and 1 x Width Kit to the nearest longer size.

3.For 3 or more sliding panes select 1 x Multi-Pane Kit for each additional pane.

4.The kit contains accessories and step-by-step instructions.

5.Select your glazing material after you have installed the outer tracks and taken precise measurements from them. Each single frame should not exceed 20sq. ft.

Select options
/
Share it
Share on:
UPVC Horizontal Sliding Width Kit
£56.00 – £126.00
Select options

UPVC Horizontal Sliding Width Kit is Available in UPVC – Width 915mm (3ft) to 2438mm (8ft)

The UPVC Horizontal Sliding DIY secondary glazing kits Width Kit makes up to give two panes which may be of equal or unequal size to match your existing window layout. The basic two-pane system may be extended to three or more panes by using one multi-pane kit for each additional pane.

The panes slide smoothly in tracks which are fitted to the window recess. There should be a flat area of at least 42mm ( 1 11/16″ ) all round to accept the tracks. The system is sutable for windows up to 8 feet wide by 6 feet high, but no single pane should exceed the following sizes for 4mm glass or acrylic and 2mm acrylic.

SELECTING YOUR KITS

1.Measure the height and width of your window recess.

2.For 2 Sliding panes choose 1 x Height Kit and 1 x Width Kit to the nearest longer size.

3.For 3 or more sliding panes select 1 x Multi-Pane Kit for each additional pane.

4.The kit contains accessories and step-by-step instructions.

5.Select your glazing material after you have installed the outer tracks and taken precise measurements from them. Each single frame should not exceed 20sq. ft.

Select options
/
Share it
Share on:
White Aluminium Accessory Pack – # Required in addition to width and height pieces
£16.00
Add to cart

White Aluminium Accessory Pack – # Required in addition to width and height pieces

Add to cart
/
Share it
Share on:
White Aluminium Hinged Height Kit
£35.00 – £70.00
Select options

White Aluminium Hinged Height Kit is Available in white aluminium – Height 915mm (3ft) to height 1524mm (5t)
The White Aluminium Hinged Pane System makes up to give one hinged pane. It may be hinged from the side or from the top to match your window. The system fits directly to the flat wooden face of the window surround provided it is at least 32mm (1 1/4″) wide to accept the fittings.

Where two hinged panes are used on the same window , allow at least 50 mm ( 2″ ) where the panes meet.

SELECTING YOUR KITS

1.Measure the height and width of your window opening

2.Select a Width Kit not shorter than the width of your window opening.

3.Select a Height Kit which exceeds the height of your window opening by at least 32mm (1 1/4″ ).

4.You will also need an Accessory Kit for each pane

5.The maximum pane size is 12sq.ft (1.11 sq m)when side hinged, 18sq.ft. (1.67 sq m( when top hinged.

Select options
/
Share it
Share on:
White Aluminium Hinged Width Kit
£25.00 – £55.00
Select options

Available white aluminium – Width 610mm (2ft) to width 1524mm (5ft)

The Hinged Pane System makes up to give one hinged pane. It may be hinged from the side or from the top to match your window. The system fits directly to the flat wooden face of the window surround provided it is at least 32mm (1 1/4″) wide to accept the fittings.

Where two hinged panes are used on the same window , allow at least 50 mm ( 2″ ) where the panes meet.

SELECTING YOUR KITS

1.Measure the height and width of your window opening

2.Select a Width Kit not shorter than the width of your window opening.

3.Select a Height Kit which exceeds the height of your window opening by at least 32mm (1 1/4″ ).

4.You will also need an Accessory Kit for each pane.

5.The maximum pane size is 12sq.ft when side hinged, 18sq.ft. when top hinged.

Select options
/
Share it
Share on:
UPVC Vertical Sliding (Sash) Width Kit
£60.00 – £90.00
Select options

UPVC Vertical Sliding (Sash) Width Kit Available in UPVC – Width 610mm or 2(ft) to 1220mm or (4ft)

This UPVC Vertical Sliding (Sash) Width Kit is specially designed for traditional sash windows, but is ideal for any window where top or bottom access is required.

As with the verticalSliding System the panes may be of equal or unequal size to match your window layout.

The panes are held open when required by an ingenious system of ratchets which support the pane in any position.

The Vertical Sliding System is suitable for windows up to 8 feet high or 4 feet wide but no single pane should exceed 12sq.ft in area.

It is normally fitted to the inside of the window recess. If, however , you have no suitable recess, the system may also be fitted directly to the flat wooden surface of the window surround. In either case there should be a minimum flat area of at least 42mm (1 11/16″ ) to accept the tracks.

SELECTING YOUR KITS

1.Measure the height and width of your window recess.

2.Choose 1 x Height Kit and 1 x Width Kit to the nearest longer size.

3.The kit contains accessories and step-by-step instructions.

4.Select your glazing material after you have installed the outer tracks and taken precise measurements from them. Each single frame should not exceed 20sq. ft.

Select options
/
Share it
Share on:
UPVC Vertical Sliding (Sash) Height Kit
£90.00 – £142.00
Select options

UPVC Vertical Sliding (Sash) Height Kit is Available in UPVC – Height 1220mm or (4ft) to 2438mm or (8ft)

This UPVC Vertical Sliding (Sash) Height Kit is specially designed for traditional sash windows, but is ideal for any window where top or bottom access is required.

As with the vertical Sliding System the panes may be of equal or unequal size to match your window layout.

The panes are held open when required by an ingenious system of ratchets which support the pane in any position.

The Vertical Sliding System is suitable for windows up to 8 feet high or 4 feet wide but no single pane should exceed 12sq.ft in area.

It is normally fitted to the inside of the window recess. If, however , you have no suitable recess, the system may also be fitted directly to the flat wooden surface of the window surround. In either case there should be a minimum flat area of at least 42mm (1 11/16″ ) to accept the tracks.

SELECTING YOUR KITS

1.Measure the height and width of your window recess.

2.Choose 1 x Height Kit and 1 x Width Kit to the nearest longer size.

3.The kit contains accessories and step-by-step instructions.

4.Select your glazing material after you have installed the outer tracks and taken precise measurements from them. Each single frame should not exceed 20sq. ft.

Select options
/
Share it
Share on:
White Aluminium Horizontal Sliding DIY secondary glazing Width Kit
£96.00 – £164.00
Select options

Available in white aluminium – Width 1220mm (4ft) to 2428mm (8ft)

The system makes up to give two panes which may be of equal or unequal size to match your existing window layout. The basic two-pane system may be extended to three or more panes by using one multi-pane kit for each additional pane.

The panes slide smoothly in tracks which are fitted to the window recess. There should be a flat area of at least 42mm ( 1 11/16″ ) all round to accept the tracks. The system is suitable for windows up to 8 feet wide by 6 feet high, but no single pane should exceed the following sizes for 4mm glass or acrylic and 2mm acrylic.

SELECTING YOUR KITS

1.Measure the height and width of your window recess.

2.For 2 Sliding panes choose 1 x Height Kit and 1 x Width Kit to the nearest longer size.

3.For 3 or more sliding panes select 1 x Multi-Pane Kit for each additional pane.

4.The kit contains accessories and step-by-step instructions.

5.Select your glazing material after you have installed the outer tracks and taken precise measurements from them. Each single frame should not exceed 20sq. ft.

Select options
/
Share it
Share on:
White Aluminium Horizontal Sliding DIY secondary glazing Height Kit
£75.00 – £155.00
Select options

White Aluminium Horizontal Sliding DIY secondary glazing Height Kit is Available in white aluminium – Height 610mm (2ft) to height 1829mm or (6ft)

The White Aluminium Horizontal Sliding DIY secondary glazing Height Kit is made up to give two panes which may be of equal or unequal size to match your existing window layout. The basic two-pane system may be extended to three or more panes by using one multi-pane kit for each additional pane.

The panes slide smoothly in tracks which are fitted to the window recess. There should be a flat area of at least 42mm ( 1 11/16″ ) all round to accept the tracks. The system is sutable for windows up to 8 feet wide by 6 feet high, but no single pane should exceed the following sizes for 4mm glass or acrylic and 2mm acrylic.

SELECTING YOUR KITS

1.Measure the height and width of your window recess.

2.For 2 Sliding panes choose 1 x Height Kit and 1 x Width Kit to the nearest longer size.

3.For 3 or more sliding panes select 1 x Multi-Pane Kit for each additional pane.

4.The kit contains accessories and step-by-step instructions.

5.Select your glazing material after you have installed the outer tracks and taken precise measurements from them. Each single frame should not exceed 20sq. ft.

Select options
/
Share it
Share on:
UPVC Horizontal Multipane 1829mm or 6‘ – * Optional Parts
£38.00
Add to cart

UPVC Horizontal Multipane 1829mm or 6‘ – * Optional Parts

Add to cart
/
Share it
Share on:

PreviousNext

DIY Secondary Glazing Kits

DIY Secondary Glazing Kits By LinkLine.

existing character windows

Flexibility

reducing external noise

Proven Market leaders

Our DIY Secondary Glazing Kits

Vertical Sliding Pane Kits

Horizontal Sliding Pane Kits

Hinged Pane Kits

All products

Best Sellers

Featured

All products

White Aluminium Horizontal Sliding DIY secondary glazing Width Kit

UPVC Horizontal Sliding Width Kit

UPVC Horizontal Sliding Height Kit

UPVC Vertical Sliding (Sash) Width Kit

UPVC Vertical Sliding (Sash) Height Kit

White Aluminium Hinged Width Kit

White Aluminium Hinged Height Kit

White Aluminium Accessory Pack – # Required in addition to width and height pieces

White Aluminium Horizontal Multipane – * Optional Parts

UPVC Horizontal Multipane 1829mm or 6‘ – * Optional Parts

Best Sellers

UPVC Horizontal Sliding Height Kit

UPVC Horizontal Sliding Width Kit

White Aluminium Accessory Pack – # Required in addition to width and height pieces

White Aluminium Hinged Height Kit

White Aluminium Hinged Width Kit

UPVC Vertical Sliding (Sash) Width Kit

UPVC Vertical Sliding (Sash) Height Kit

White Aluminium Horizontal Sliding DIY secondary glazing Width Kit

White Aluminium Horizontal Sliding DIY secondary glazing Height Kit

UPVC Horizontal Multipane 1829mm or 6‘ – * Optional Parts

Quick Contact

Contacts

DIY Secondary Glazing Kits

DIY Secondary Glazing Kits

DIY Secondary Glazing Kits By LinkLine.

existing character windows

Flexibility

reducing external noise

Proven Market leaders

Our DIY Secondary Glazing Kits

Vertical Sliding Pane Kits

Horizontal Sliding Pane Kits

Hinged Pane Kits

All products

Best Sellers

Featured

All products

White Aluminium Horizontal Sliding DIY secondary glazing Width Kit

Share on:

UPVC Horizontal Sliding Width Kit

Share on:

UPVC Horizontal Sliding Height Kit

Share on:

UPVC Vertical Sliding (Sash) Width Kit

Share on:

UPVC Vertical Sliding (Sash) Height Kit

Share on:

White Aluminium Hinged Width Kit

Share on:

White Aluminium Hinged Height Kit

Share on:

White Aluminium Accessory Pack – # Required in addition to width and height pieces

Share on:

White Aluminium Horizontal Multipane – * Optional Parts

Share on:

UPVC Horizontal Multipane 1829mm or 6‘ – * Optional Parts

Share on:

Best Sellers

UPVC Horizontal Sliding Height Kit

Share on:

UPVC Horizontal Sliding Width Kit

Share on:

White Aluminium Accessory Pack – # Required in addition to width and height pieces

Share on:

White Aluminium Hinged Height Kit

Share on:

White Aluminium Hinged Width Kit

Share on:

UPVC Vertical Sliding (Sash) Width Kit

Share on:

UPVC Vertical Sliding (Sash) Height Kit

Share on:

White Aluminium Horizontal Sliding DIY secondary glazing Width Kit

Share on:

White Aluminium Horizontal Sliding DIY secondary glazing Height Kit

Share on:

UPVC Horizontal Multipane 1829mm or 6‘ – * Optional Parts

Share on:

Quick Contact

Contacts

DIY Secondary Glazing Kits